Proper and frequent lubrication of your hydraulic hammer is critical!
Our system dispenses grease to the hammer anytime the hammer is reciprocating. The 24 VDC pumps deliver up to 3000 psi of grease, kits are complete with adapters, hose, fittings, clamps.
Pump is wired in parallel with the hammer actuation solenoid to energize pump when the hammer is actuating. If your hammer is hydraulically actuated then you must add the pressure switch shown below to provide contact closure for the pump. This system is ideal for stationary hammers on primary crushers and mobile hammers. Grease output ranges from .171 in?/min to .513 in?/min depending on model selected.
All Kits Include:
- 24 VDC pump with a liter reservoir dependent on the models below
- pumping elements
- pressure gauge
- high pressure safety valve
- 25 feet of wiring cable and ISO connector
- 60 feet of high-pressure hose with fitting crimped on one end, field installable fitting for the other end to make getting the proper length hose easy!
- Proper hose and fitting adapters and heavy duty weld type hose supports for the supply hose.
- Heavy duty steel mounting bracket.
- Wiring and installation instructions.
There are several models to choose from
L96224HK: Has 2 liter reservoir, one pump element, output .171 cubic inches per minute, suggested for 2.5″ or less tools diameter
L96424HK: Has 4 liter reservoir, two pump elements, output .342 cubic inches per minute, suggested for 3″ to 5″ tools diameter
L96824HK: Has 8 liter reservoir, three pump element output .513 cubic inches per minute, suggested for 5″ or larger tools diameter
For installations of kits to machines that require an additional pressure switch to run the pump please review the switch that we offer: ils-hlps